Select Language
< Back to Menu
鋁卷清洗設備
鋁卷清洗設備
Introduction Our aluminium coil surface cleaning unit are equipped on the aluminium recoiling linw. The surface clleaning unit are suitable for the following aluminium coil specification: Processing material: AA1XXX,3XXX,8XXX,5XXX Width of coils: 900 - 2000mm Coil ID:510/610mm Out dia. Of coils:2100mm Max Width tolerance: less than 0.1mm Telescopicity: 1.0mm max. The way of centring:Hydraulic automatic+ cc control In most applications,we must chemically or electro-chemically clean aluminium roll
Introduction
Our aluminium coil surface cleaning unit are equipped on the aluminium recoiling linw.
The surface clleaning unit are suitable for the following aluminium coil specification:
Processing material: AA1XXX,3XXX,8XXX,5XXX
Width of coils: 900 - 2000mm
Coil ID:510/610mm
Out dia. Of coils:2100mm Max
Width tolerance: less than 0.1mm
Telescopicity: 1.0mm max.
The way of centring:Hydraulic automatic + cc control
In most applications, we must chemically or electro-chemically clean aluminium rolled products. This aluminium surface cleaning is to remove residual mill oil, smut, surface oxides and, most importantly, the near-surface disturbed layer so as to provide a uniform surface to receive pretreatment.As per Application, cleaning can be done with heating water,Acid or alkaline cleaning solutions
Our aluminium coil surface cleaning unit are equipped on the aluminium recoiling linw.
The surface clleaning unit are suitable for the following aluminium coil specification:
Processing material: AA1XXX,3XXX,8XXX,5XXX
Width of coils: 900 - 2000mm
Coil ID:510/610mm
Out dia. Of coils:2100mm Max
Width tolerance: less than 0.1mm
Telescopicity: 1.0mm max.
The way of centring:Hydraulic automatic + cc control
In most applications, we must chemically or electro-chemically clean aluminium rolled products. This aluminium surface cleaning is to remove residual mill oil, smut, surface oxides and, most importantly, the near-surface disturbed layer so as to provide a uniform surface to receive pretreatment.As per Application, cleaning can be done with heating water,Acid or alkaline cleaning solutions
