Introduction Aluminium Alloy chequer plate, also known as 5 Bar, Durbar Treadplate, is an impressively robust, long lasting and visually appealing material. Chequer plate is widely used for various surface protection applications in both exterior and interior applications. When used as a vertical cladding material to safeguard doors and walls, maintenance costs are reduced by not having to constantly repair and re-decorate unprotected surfaces. We are equipped with 7 aluminium 5 bar chequer plat
Aluminium Alloy chequer plate, also known as 5 Bar, Durbar & Treadplate, is an impressively robust, long lasting and visually appealing material.
Chequer plate is widely used for various surface protection applications in both exterior and interior applications.
When used as a vertical cladding material to safeguard doors and walls, maintenance costs are reduced by not having to constantly repair and re-decorate unprotected surfaces.
We are equipped with 7 aluminium 5 bar chequer plate production line, our tread plates are rolled from our existing aluminium coil/sheets
Surface: mill finish
Pattern: 5 bars
We quickly fabricate chequer plates by cutting, forming, to suit project specific requirements.
5 Bar Aluminum Tread Plate Specifications
· Alloy :1050,1060,1070,3003,3105,3102,5005,5052
· Temper: 0,H12,H14,H16,H18,H22,H24,H26,H32,H34,H111,T6,F,T65
· Thickness: 0.8~8mm
· Width: 1000~1250mm
· Length: 1000~3000MM
· Surface finish: Mill finish
· Pattern height:Sheet Thickness from 0.8 mm to 2.0mm, bar height: min 0.6mm,Sheet Thickness above 2.0mm, bar height: min.1.20mm
Be aware that the thickness of checked plates are measured without the pattern height, and therefore a 5mm tread plate has a plate thickness of 5 mm ,and a pattern height is between 0.6-1.3mm.
For 5 bar aluminum checker plate,here are big five bar around 44mm and small five bar around 34mm.
· t has a non-slip surface that can be drilled and fixed in place, suitable for indoor and outdoor use.
· Can be used for ceilings, walls, etc., furniture, cabinets, elevators, signs, nameplates, luggage
· tread plate, strong, light-weight, has a high corrosion resistance
· Ideal for use in industrial settings, transportation, and decoratively
· Suitable for Ramps, Kickplates, Trailers, stair treads
· Refrigeration floor, Truck floor, flooring, stairs, indoor and outdoor decoration
· in air conditioners, refrigerators, cars, and planes. In conventional applications in air conditioning, refrigerators, etc
Aluminum tread plate weigh
We know that it’s very easy to calculate the weight of an aluminum flat sheet with a density of 2.71, but for an aluminum checked plate, we should take the weight of the bar into consideration. With all factors, we can make the density be 2.95 or 3.0.
No matter domestic short distance or export long distance transportation, proper packing of sheets can ensure safety transportation and avoid damaging sheets during transport, loading and unlaoding.
Our packing way is experenced during all these years:
First of all, a dense waterproof film is used to wrap the aluminum sheet tightly and carefully sealed with adhesive tape to ensure that no part of the aluminum sheet is exposed to the possible damp air, and sufficient desiccant is placed inside the package. This is to ensure that the aluminum plate internal drying, not to allow aluminum plate to contact any liquid, prevent aluminum plate oxidation or corrosion.
Outside the waterproof membrane, wrap a layer of cowhide waterproof paper. This is mainly to ensure that the weak waterproof film will not be damaged, waterproof paper to a certain extent can also be isolated from external moisture, thick kraft paper can be a good insulation of the surface and internal environment temperature difference, to avoid the aluminum plate due to temperature differences too large water vapor condensation phenomenon, prevent aluminum plate oxidation
Outside the kraft paper, the whole layer of corrugated paper will be covered to protect the edges and corners of the aluminum plate with special corrugated protection, and finally with metal wrapping belt will be aluminum plate and wooden saucer packed together. Strengthen several tons of aluminium sheet to prevent the aluminium sheet from falling and sliding during transportation, and avoid friction between aluminium sheet and aluminium sheet after fixing.
After repeated tests, this packaging method can not only effectively prevent corrosion and oxidation of aluminum plate, but also protect aluminum plate during long-distance transportation, aluminum plate will not be deformed and scratched because of transportation.